Command Reference Guide

42 ● data-flow-format 3Com Router 5000 Family and Router 6000 Family
Command Reference
data-flow-format
Purpose Use the data-flow-format command to configure the unit in which data flows
are sent to a RADIUS Server.
Use the undo data-flow-format command to restore the unit to the default
setting.
Syntax data-flow-format data { byte | giga-byte | kilo-byte | mega-byte }
packet { giga-packet | kilo- packet | mega-packet | one-packet }
undo data-flow-format
Parameters data
Sets data unit.
byte
Data flows are sent in bytes.
giga-byte
Data flows are sent in gigabytes.
kilo-byte
Data flows are sent in kilobytes.
mega-byte
Data flows are sent in megabytes.
packet
Sets data packet unit.
giga-packet
Data packets are sent in giga-packets.
kilo-packet
Data packets are sent in kilo-packets.
mega-packet
Data packets are sent in mega-packets.
one-packet
Data packets are sent in the units of one-packet.
Default By default, data flows are sent in bytes and data packets in the units of one-packet.
Example Send data flows and packets destined for the RADIUS server "3Com" in kilobytes and
kilo-packets.
[3Com-radius-3Com] data-flow-format data kilo-byte packet kilo-packet
View This command can be used in the following views:
■ RADIUS view
Related Command display radius