Command Reference Guide

3Com Router 5000 Family and Router 6000 Family certificate request url ● 35
Command Reference
certificate request url
Purpose Use the certificate request url command to specify the server URL for
certificate request through SCEP protocol. SCEP is a protocol specialized in the
communication with authentication authorities.
Use the undo certificate request url command to delete the concerned
location setting.
Syntax certificate request url string
undo certificate request url
Parameters string
Refers to the server URL of the registration authority.
Ranging from 1 to 127 characters, it composes server
location and CA CGI command interface script
location in the format of
http:
//server_location /ca_script_location
.
Among them,
server_location is generally
expressed as IP address, which if is to be replaced by
server name, DNS needs to be configured for the
conversion match between IP addresses and server
names.
Default By default, no server URL is specified.
Example Specify the server location for certificate request
[RouterCA-pki-domain-1] certificate request url http: //169.254.0.100/
certsrv/mscep/mscep.dll
View This command can be used in the following views:
■ PKI Domain view