Command Reference Guide

34 ● certificate request polling 3Com Router 5000 Family and Router 6000 Family
Command Reference
certificate request polling
Purpose Use the certificate request polling command to specify the interval
between two polls and the retry times.
Use the undo certificate request polling command to restore the default
parameters.
Syntax certificate request polling { interval minutes | count count }
undo certificate request polling { interval | count }
Parameters minutes
Renders the interval between two polls (in minutes).
Valid values are 5 to 60.
If no value is specified, the default is 20 minutes.
count
Indicates the retry times. Valid values are 1 to 100.
If no value is specified, the default is 50.
Example Specify the interval between two polls and the retry times
[RouterCA-pki-domain-1] certificate request polling interval 15
[RouterCA-pki-domain-1] certificate request polling count 40
View This command can be used in the following views:
■ PKI Domain view
Description When the request is delivered, if CA requires manual authentication, it takes a long
time before the certificate issuing. The client therefore needs to periodically poll the
request for the timely acquisition of the certificate after being authorized.
Related Command display pki certificate