Command Reference Guide

3Com Router 5000 Family and Router 6000 Family authentication-algorithm ● 21
Command Reference
authentication-algorithm
Purpose Use the authentication-algorithm command to select the authentication
algorithm for an IKE proposal.
Use the undo authentication-algorithm command to restore the
authentication algorithm for an IKE proposal to the default.
Syntax authentication-algorithm { md5 | sha }
undo authentication-algorithm
Parameters md5
Selects the authentication algorithm: HMAC-MD5.
sha
Selects the authentication algorithm: HMAC-SHA1.
Default By default, HMAC-SHA1 authentication algorithm is used.
Example Set HMAC-MD5 as the authentication algorithm for IKE proposal 10.
[3Com] ike proposal 10
[3Com-ike-proposal-10] authentication-algorithm md5
View This command can be used in the following views:
■ IKE Proposal view
Related Commands ■ ike proposal
■ display ike proposal