Command Reference Guide

3Com Router 5000 Family and Router 6000 Family aging-time ● 17
Command Reference
aging-time
Purpose Use the aging-time command to configure SYN status waiting timeout value and
FIN status waiting timeout value of TCP, session entry idle timeout value of TCP and
UDP.
Use the undo aging-time command to restore the default value.
Syntax aging-time { syn | fin | tcp | udp } seconds
undo aging-time { syn | fin | tcp | udp }
Parameters seconds
The default timeout time of SYN, FIN, TCP and UDP is
30s, 5s, 3600s and 30s, respectively.
Example Configure SYN status waiting timeout value of TCP as 20 seconds.
[3Com-aspf-policy-1] aging-time syn 20
Configure FIN status waiting timeout value of FIN as 10 seconds.
[3Com-aspf-policy-1] aging-time fin 10
Configure TCP idle timeout value as 3000 seconds.
[3Com-aspf-policy-1] aging-time tcp 3000
Configure UDP idle timeout value as 110 seconds.
[3Com-aspf-policy-1] aging-time udp 110
View This command can be used in the following views:
■ ASPF Policy view
Description Before the aging-time expires, the system will retain the connections and the sessions
that have been set up.
Related Commands ■ display aspf all
■ display aspf policy
■ display aspf session
■ display aspf interface