Command Reference Guide

10 ● accounting 3Com Router 5000 Family and Router 6000 Family
Command Reference
accounting
Purpose Use the accounting command to configure an accounting scheme for the current
ISP domain.
Use the undo accounting command to remove the accounting scheme used by
the ISP domain.
Syntax accounting { hwtacacs-scheme hwtacacs-scheme-name | radius-scheme
radius-scheme-name | none }
undo accounting
Parameters hwtacacs-scheme
radius-scheme-name
Specifies the HWTACACS scheme for accounting.
radius-scheme
hwtacacs-scheme-name
Specifies the RADIUS scheme for accounting.
none
Specifies not to perform accounting.
Default By default, no separate accounting scheme is available.
Example Specify ISP domain h3c163.net to use RADIUS scheme radius for accounting.
[3Com-isp-h3c163.net] accounting radius-scheme radius
Specify ISP domain h3c to use HWTACACS scheme hwtac for accounting.
[3Com-isp-h3c] accounting hwtacacs-scheme hwtac
View This command can be used in the following views:
■ ISP Domain view
Description Note that the RADIUS or HWTACACS accounting scheme you configure by using the
accounting command must exist already.
If you configure the accounting command in ISP domain view, the system uses the
scheme specified in the command for accounting. Otherwise, the system uses the
scheme specified by using the
scheme command.
Related Commands ■ scheme
■ radius scheme
■ hwatacacs scheme