Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display trapbuffer ● 157
Command Reference
display trapbuffer
Purpose Use the display trapbuffer command to view the information entries in the
trap buffer.
Syntax display trapbuffer [ size sizeval ]
Parameters size
Specifies the number of information entries in the trap
buffer.
sizeval
Number of entries to be displayed.
Default By default, the command is executed without any parameter specified to display all
information in the trap buffer.
Example Display the information in the trap buffer.
<3Com> display trapbuffer
Trapping Buffer Configuration and contents:
enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuf
dropped messages : 0
overwrote messages : 0
current messages : 0
Display 23 entries in the trap buffer.
<3Com> display trapbuffer size 23
Trapping Buffer Configuration and contents:
enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuf
dropped messages : 0
overwrote messages : 0
current messages : 0
Table 36 Description on the fields of the display trapbuffer command
Field Description
Trapping Buffer Configuration and
contents: enabled
Trap buffer is enabled
Allowed max buffer size: 1024 Maximum size of the trap buffer is 1024 entries
Actual buffer size: 256 Actual size of the trap buffer is 256 entries
channel number: 3
channel name: trapbuffer
Number and name of the information channel for the
trap buffer
Dropped messages: 0 Number of dropped messages
Overwritten messages: 0 Number of overwritten messages
Current messages: 96 Number of current messages