Command Reference Guide

3Com Router 5000 Family and Router 6000 Family static-lsp egress l2vpn ● 89
Command Reference
static-lsp egress l2vpn
Purpose Use the static-lsp egress l2vpn command to configure a static LSP used in
L2VPN for egress LSR.
Use the undo static-lsp egress l2vpn command to delete an LSP used in
L2VPN of egress LSR.
Syntax static-lsp egress lsp-name l2vpn incoming-interface interface-type
interface-num in-label in-label
undo static-lsp egress lsp-name l2vpn
Parameters lsp-name
LSP name
interface-type
Interface-num
Interface type and interface number
in-label-value
Inbound label value, in range of 16 to 1024
Example Add a static LSP citya-city at egress LSR.
[3Com -mpls] static-lsp egress citya-cityb l2vpn incoming-interface
serial8/0/0 in-label 233
View This command can be used in the following views:
■ MPLS view
Description Two LSPs (one in each direction) should be created in advance before creating a
remote CCC connection.
Related Commands ■ static-lsp ingress l2vpn
■ debugging mpls