Command Reference Guide

86 ● snmp-agent trap enable ldp 3Com Router 5000 Family and Router 6000 Family
Command Reference
snmp-agent trap enable ldp
Purpose Use the snmp-agent trap enable ldp command to enable Trap function in
MPLS LDP creation.
Use the undo snmp-agent trap enable ldp command to disable Trap
function in MPLS LDP creation.
Syntax snmp-agent trap enable ldp
undo snmp-agent trap enable ldp
Parameters None
Default By default, TRAP function is not enabled during MPLS LDP creation.
Example Enable TRAP function during MPLS LDP creation.
[3Com ] snmp-agent trap enable ldp
View This command can be used in the following views:
■ System view