Command Reference Guide

3Com Router 5000 Family and Router 6000 Family remote-ip ● 77
Command Reference
remote-ip
Purpose Use the remote-ip command to configure a remote IP address. The address should
be the LSR ID of the remote LSR. As remote peers adopt LSR ID as their transport
addresses, the last two remote peers use their LSR ID as their transport addresses for
creating TCP connection.
Syntax remote-ip ip-address
Parameters ip-address
IP address of a remote peer.
Example Configure the address of remote-peer.
[3Com ] mpls ldp remote-peer 12
[3Com -remote-peer12] remote-ip 192.168.1.
View This command can be used in the following views:
■ Remote-Peer view
Description remote-peer command is mainly used for extension discovery mode to establish
session with peers that are not directly connected with the links.
Related Command mpls ldp remote-peer