Command Reference Guide

3Com Router 5000 Family and Router 6000 Family peer upe ● 75
Command Reference
peer upe
Purpose Use the peer upe command to configure BGP peer as the UPE of hierarchical
BGP/MPLS VPN.
Use the undo peer upe command to delete this configuration.
Syntax peer peer-address upe
undo peer peer-address} upe
Parameters peer-address
IP address of a peer.
Example Configure BGP peer as the UPE of hierarchical BGP/MPLS VPN.
[3Com -bgp] ipv4-family vpnv4
[3Com -bgp-af-vpn] peer 1.1.1.1 upe
View This command can be used in the following views:
■ BGP view