Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1961196219631964196519661967196819691970
68 ● mtu 3Com Router 5000 Family and Router 6000 Family
Command Reference
mtu
Purpose Use the mtu command to configure MTU of Kompella MPLS L2VPN.
Syntax mtu mtu
Parameters mtu
Layer2 MTU value of VPN. MTU defaults to 1500.
Example Configure the mtu of VPN “Huawei” as 1000.
[3Com -l2vpn-huawei] mtu 1000
View This command can be used in the following views:
■ MPLS L2VPN view
Description When configuring VPN layer2 mtu, make sure that the mtu values of different PEs in
the same VPN are the same in the whole SP network. Otherwise, VPN will not work
normally.
Related Command mpls l2vpn encapsulation