Command Reference Guide

3Com Router 5000 Family and Router 6000 Family mpls l2vpn encapsulation ● 65
Command Reference
mpls l2vpn encapsulation
Purpose Use the mpls l2vpn encapsulation command to create Kompella MPLS
L2VPN, specify encapsulation type, and enter MPLS L2VPN view.
Use the undo mpls l2vpn encapsulation command to remove the
encapsulation.
Syntax mpls l2vpn vpn-name encapsulation { atm-aal5 | ethernet | fr | hdlc |
ppp | vlan | atm-cell [ atm-1to1-vcc | atm-1to1-vpc ] }
undo mpls l2vpn vpn-name
Parameters vpn-name
Unique VPN name in PE with 1 to 20 bytes.
encapsulation
MPLS L2VPN encapsulation type.
Ethernet
Ethernet encapsulation mode.
vlan
VLAN encapsulation mode.
fr
FR encapsulation mode.
hdlc
HDLC encapsulation mode.
ppp
PPP encapsulation mode.
atm-aal5
ATM frame mode encapsulation mode.
atm-cell
N-to-One encapsulation mode for ATM cell transparent
transmission.
atm-1to1-vcc
One-to-one VCC encapsulation mode for ATM cell
transparent transmission.
atm-1to1-vpc
One-to-one VPC encapsulation mode for ATM cell
transparent transmission.
Example Create a Kompella MPLS L2VPN, named “3com”, with encapsulation type atm-cell
atm-1to1-vcc:
<3COM> system-view
[3COM] mpls l2vpn 3com encapsulation atm-cell atm-1to1-v
View This command can be used in the following views:
■ System view
Description Create Kompella MPLS L2VPN after MPLS L2VPN is enabled. All the parameters of
L2VPN are configured in L2VPN view.