Command Reference Guide

64 ● mpls l2vc 3Com Router 5000 Family and Router 6000 Family
Command Reference
mpls l2vc
Purpose Use the mpls l2vc command to create an LDP connection.
Use the undo mpls l2vc command to delete the connection.
Syntax mpls l2vc ip-address vc-id [ atm-cell [ atm-1to1-vcc | atm-1to1-vpc ] ]
undo mpls l2vc
Parameters ip-address
lsr-id address of peer PE.
vc-id
ID of the VC, ranging from 1 to 4294967295.
atm-cell
N-to-one encapsulation mode for ATM cell transparent
transmission.
atm-1to1-vcc
One-to-one VCC encapsulation mode for ATM cell
transparent transmission.
atm-1to1-vpc
One-to-one VPC encapsulation mode for ATM cell
transparent transmission.
Example Create a virtual connection with ID 23, with the interface in ATM transparent
transmission mode, adopting ATM CELL N-to-One encapsulation mode.
<3COM> system-view
[3COM] interface atm 1/0/0
[3COM-Atm1/0/0] atm-ctt
[3COM-Atm1/0/0] pvc 1/32
[3COM-atm-pvc-Atm1/0/0-1/32] quit
[3COM-Atm1/0/0] mpls l2vc 10.0.0.11 23 atm-cell
View This command can be used in the following views:
■ Interface view
Description Supported interface types: Serial, Asy Serial, POS, ATM, ATM subinterface, Ethernet,
Ethernet subinterface, VE, GE, GE subinterface.
Enable MPLS L2VPN and encapsulate CCC on the interface before using this
command.
Related Commands ■ mpls l2vpn
■ ccc