Command Reference Guide

3Com Router 5000 Family and Router 6000 Family mpls static-l2vc ● 63
Command Reference
mpls static-l2vc
Purpose Use the mpls static-l2vc command to create an SVC MPLS L2VPN connection.
Use the undo mpls static-l2vc command to delete the connection.
Syntax mpls static-l2vc destination destination-ip-address transmit-vpn-label
transmit-label-value receive-vpn-label receive-label-value [ atm-cell
[ atm-1to1-vcc | atm-1to1-vpc ] ]
undo mpls static-l2
Parameters destination
destination-ip-address
IP address of the destination router.
transmit-vpn-label
transmit-label-value
Label value of the transmitting VPN.
receive-vpn-label
receive-label-value
Label value of the receiving VPN.
atm-cell
N-to-one encapsulation mode for ATM cell transparent
transmission.
atm-1to1-vcc
One-to-one VCC encapsulation mode for ATM cell
transparent transmission.
atm-1to1-vpc
One-to-one VPC encapsulation mode for ATM cell
transparent transmission.
Example Create an SVC MPLS L2VPN connection, with the interface in ATM cell transparent
transmission mode, adopting one-to-one VPC encapsulation mode.
<3COM> system-view
[3COM] interface atm 1/0/0
[3COM-Atm1/0/0] atm-ctt
[3COM-Atm1/0/0] pvc 1/32
[3COM-atm-pvc-Atm1/0/0-1/32] quit
[3COM-Atm1/0/0] mpls static-l2vc destination 192.1.1.1
transmit-vpn-label 333 receive-vpn-label 111 atm-cell atm-1to1-vpc
View This command can be used in the following views:
■ Interface view