Command Reference Guide

56 ● mpls ldp password 3Com Router 5000 Family and Router 6000 Family
Command Reference
mpls ldp password
Purpose Use the mpls ldp password command to configure LDP authentication mode.
Use the undo mpls ldp password command to delete the configuration.
Syntax mpls ldp password { cipher | simple } password
undo mpls ldp password
Parameters simple
Transmits password in plain text.
cipher
Transmits password in encrypted text (MD5).
password
User password.
Example Configure the LDP authentication mode to be in plain text, with a password of 123.
[3Com -Ethernet0/0/0.1] mpls ldp password simple 123
View This command can be used in the following views:
■ Interface view
■ Remote-Peer view