Command Reference Guide

152 ● display user-interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
display user-interface
Purpose Use the display user-interface command to view information about the
specified or all user interfaces.
Syntax display user-interface [ type-name ] [ number ] [summary]
Parameters type-name
User interface type. Together with a user interface
index, it specifies a user interface.
number
Number of a user interface. If type-name is not
specified, number is an absolute index in the range 0
to 38. If type-name is specified, it is a relative index
whose value depends on the user interface type.
summary
Displays summary about user interfaces.
Example Display information about user interface 0.
<3Com> display user-interface 0
Idx Type Tx/Rx Modem Privi Auth Int
+ 0 CON 0 9600 - 3 N -
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authentication use AAA.
L : Authentication use local database.
N : Current UI need not authentication.
P : Authentication use current UI’s password.
Display summary about user interface 0.
<3Com> display user-interface 0 summary
0: U
1 character mode users. (U)
1 total UIs in use.
UI’s name: con0
View This command can be used in the following views:
■ Any view