Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ip vpn-instance ● 45
Command Reference
ip vpn-instance
Purpose Use the ip vpn-instance command to create and configure a vpn-instance.
Use the
undo ip vpn-instance command to delete the specified vpn-instance.
Use the
ip vpn-instance command to create a vpn-instance named vpn-name.
Syntax ip vpn-instance vpn-instance-name
undo ip vpn-instance vpn-instance-name
Parameters vpn-instance-name
Name assigned to vpn-instance.
Default By default, vpn-instance is not defined. Neither input nor output list is associated with
vpn-instance. No route-map is associated with vpn-instance.
Example Create VPN instance vpn1.
[3Com ] ip vpn-instance vpn1
[3Com -vpn-vpn1]
View This command can be used in the following views:
■ System view
■ Routing Protocol (BGP and RIP) view