Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
191192193194195196197198199200
3Com Router 5000 Family and Router 6000 Family display telnet-server source-ip ● 151
Command Reference
display telnet-server source-ip
Purpose Use the display telnet-server source-ip command to display the source
IP address configured for the Telnet server.
Syntax display telnet-server source-ip
Parameters None
Example Display the current source IP address of the Telnet server.
<Router> display telnet-server source-ip
The source IP specified is 0.0.0.0
View This command can be used in the following views:
■ Any view
Description If a source interface has been specified for the Telnet server, the IP address of the
interface is displayed. If neither source interface nor source IP address has been
specified for the Telnet server, 0.0.0.0 is displayed.