Command Reference Guide

40 ● if-match mpls-label 3Com Router 5000 Family and Router 6000 Family
Command Reference
if-match mpls-label
Purpose Use the if-match mpls-label command to configure to match public network
routes with MPLS labels only.
Use the undo if-match mpls-label command to remove the match rules.
Syntax if-match mpls-label
undo if-match mpls-label
Parameters None
Example Define an if-match clause to permit the filtering of routes with labels.
[3Com -route-policy] if-match mpls-label
View This command can be used in the following views:
■ Route-Policy view
Related Command apply mpls-label