Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display mpls static-l2vc ● 31
Command Reference
display mpls static-l2vc
Purpose Use the display mpls static-l2vc command to view the connection
information of static MPLS L2VPN.
Syntax display mpls static-l2vc [ interface interface-type interface-num ]
Parameters interface-type interface
-num
Interface type and interface number
Example Display basic information of static connections.
[3Com -Ethernet1/0/1] display mpls static-l2vc
total connections: 1, 0 up, 1 down
ce-intf state destination tr-label rcv-label tnl-type tnl-index
Ethernet1/0/1 down 192.1.1.1 222 111 -- 0
[3Com ] display mpls static-l2vc interface ethernet1/0/1
CE-interface: Ethernet1/0/1 is up, VC State: down, Destination:
192.1.1.1,
transmit-vpn-label: 222, receive-vpn-label: 111,
tunnel type: --, tunnel index: 0
View This command can be used in the following views:
■ Any view