Command Reference Guide

14 ● display bgp routing label 3Com Router 5000 Family and Router 6000 Family
Command Reference
display bgp routing label
Purpose Use the display bgp routing label command to view routing information
and label information in the BGP routing table.
Syntax display bgp routing label
Parameters None
Example Display BGP routing information.
<3Com > display bgp routing label
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
In/out
Dest/Mask Next-Hop Label
--------------------------------------------------------------
#^ 9.0.0.1/32 0.0.0.0 1024/-
Display specific BGP routing information.
<3Com > display bgp routing 9.0.0.1
BGP routing table entry information of 9.0.0.1/32
Age : 00:00:32
From : local
State : valid, sourced, active,
Nexthop : 0.0.0.0
Origin : INC
As-path : (null)
Med : 1563
In/Out label : 1024/-
View This command can be used in the following views:
■ Any view
Description For common IPv4 routes without labels, “Null” is displayed.
When you view the BGP routing information by using the display bgp routing
address [ mask ] command, you can see the label information if the routes have
labels.