Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging mpls lspm ● 11
Command Reference
debugging mpls lspm
Purpose Use the debugging mpls lspm command to enable various LSP debugging.
Use the undo debugging mpls lspm command to disable the corresponding
debugging.
Syntax debugging mpls lspm { agent | all | event | ftn | interface | packet |
policy | process | vpn }
undo debugging mpls lspm { agent | all | event | ftn | interface |
packet | policy | process | vpn }
Parameters agent
Enables all MPLS Agent debugging.
all
Enables all MPLS-related debugging.
event
Enables debugging of various MPLS events.
ftn
Enables MPLS ftn debugging.
interface
Enables the MPLS debugging on the message
sending/receiving interface.
packet
Enables MPLS packet debugging.
policy
Enables MPLS policy debugging.
process
Enables debugging of MPLS internal process.
vpn
Enables all MPLS VPN debugging.
Default By default, all debugging is disabled.
Example Enable all MPLS LSP VPN debugging.
<3Com > debugging mpls lspm vpn
View This command can be used in the following views:
■ User view
Description This command is used to the debug MPLS LSPM. As debugging will affect the
performance of the router, you are recommended to use the command with caution.