Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ccc interface out-interface ● 5
Command Reference
ccc interface out-interface
Purpose Use the ccc interface out-interface command to create a local CCC
connection.
Use the
undo ccc command to delete the local CCC connection.
Syntax ccc ccc-connection-name interface interface-type interface-number
out-interface outinterface-type outinterface-num
undo ccc ccc-connection-name
Parameters ccc-connection-name
CCC connection name of 1 to 20 characters, which is
used for uniquely identifying the CCC inside the PE.
interface-type
interface-number
Interface connected to the first CE
outinterface-type
outinterface-num
Interface connected to the second CE.
Example Create a local CCC connection, with the name of clink, two CEs connected
respectively to Ethernet0/0/0 and Ethernet2/0/0.
[3Com ] ccc clink interface serial0/0/0 out-interface Ethernet 2/0/0
View This command can be used in the following views:
■ System view
Description The supported interfaces include serial, asynchronous serial, ATM, Ethernet, VE, and
GE interfaces, as well as ATM, Ethernet, and GE sub-interfaces.
For a serial, asynchronous serial, Ethernet, GE, or VE interface, CCC encapsulation
defaults to link layer encapsulation and the command does not have any parameter in
this case. This also applies to the CCC encapsulation on an Ethernet sub-interface or
GE sub-interface. For an ATM sub-interface, CCC encapsulation defaults to ATM
AAL5. In this case, the command can bring with it a parameter indicating whether the
encapsulation is ATM AAL5 or ATM CELL.