Command Reference Guide

120 ● reset igmp group 3Com Router 5000 Family and Router 6000 Family
Command Reference
reset igmp group
Purpose Use the reset igmp group command to delete the IGMP group joined on the
interface. The deletion of the group does not affect its joining again.
Syntax reset igmp group { all | interface interface-type interface-number { all
| group-address [
group-mask
] } }
all
All IGMP groups.
interface interface-type
interface-number
Interface type and interface number.
group-address
IGMP group address.
group-mask
Network segment mask of group address.
Example Delete all the IGMP groups on all interfaces.
<3Com> reset igmp group all
Delete all the IGMP groups on the interface Ethernet0/0/0.
<3Com> reset igmp group interface ethernet0/0/0 all
Delete the group 225.0.0.1 on the interface Ethernet0/0/0.
<3Com> reset igmp group interface ethernet0/0/0 225.0.0.1
Delete the IGMP groups ranging between the network segment 225.1.1.0 and
225.1.1.255 on the interface Ethernet0/0/0.
<3Com> reset igmp group interface ethernet0/0/0 225.1.1.0 255.255.255.0
View This command can be used in the following views:
■ User view