Command Reference Guide

118 ● pim timer hello 3Com Router 5000 Family and Router 6000 Family
Command Reference
pim timer hello
Purpose Use the pim timer hello command to configure the interval for sending PIM
router Hello messages.
Use the undo pim timer hello command to restore the default value.
Syntax pim timer hello seconds
undo pim timer hello
Parameters seconds
Interval for sending Hello message in seconds. Valid
values are 1 to 18000.
If not specified, the default value is 30 seconds.
Example Configure the interval of sending Hello message on the interface Ethernet1/0/0 on
the PIM router to 40 seconds.
[3Com-Ethernet1/0/0] pim sm
[3Com-Ethernet1/0/0] pim timer hello 40
View This command can be used in the following views:
■ Interface view