Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1871187218731874187518761877187818791880
116 ● pim dm 3Com Router 5000 Family and Router 6000 Family
Command Reference
pim dm
Purpose Use the pim dm command to enable PIM-DM.
Use the undo pim dm command to disable PIM-DM.
Syntax pim dm
undo pim dm
Parameters None
Default By default, PIM-DM is disabled.
Example Enable PIM-DM on the interface Ethernet1/0/0.
[3Com] multicast routing-enable
[3Com] interface ethernet1/0/0
[3Com-Ethernet1/0/0] pim dm
View This command can be used in the following views:
■ Interface view
Description Once PIM-DM is enabled on an interface, PIM-SM cannot be enabled on the same
interface and vice versa.