Command Reference Guide

114 ● pim neighbor-limit 3Com Router 5000 Family and Router 6000 Family
Command Reference
pim neighbor-limit
Purpose Use the pim neighbor-limit command to limit PIM neighbor number on an
router interface. If the number exceeds the limit configured, no new neighbor can be
added to the router.
Use the undo pim neighbor-limit command to restore the default
configuration.
Syntax pim neighbor-limit limit
undo pim neighbor-limit
Parameters limit
Upper limit of PIM neighbor number on an interface.
Valid values are 0 to 128.
Default By default, the upper limit of PIM neighbor number on an interface is 128.
Example Limit the upper limit of PIM neighbor number on the interface Ethernet1/0/0/ to 50.
[3Com-Ethernet1/0/0] pim neighbor-limit 50
View This command can be used in the following views:
■ Interface view
Description If the PIM neighbor number on an interface has exceeded the value configured during
configuration, the previous PIM neighbor will not be deleted.