Command Reference Guide
108 ● peer sa-cache-maximum 3Com Router 5000 Family and Router 6000 Family
Command Reference
peer sa-cache-maximum
Purpose Use the peer sa-cache-maximum command to limit the number of caches
originated when the router receives SA messages from an MSDP peer.
Use the undo peer sa-cache-maximum command to restore the default
configuration.
Syntax peer peer-address sa-cache-maximum sa-limit
undo peer peer-address sa-cache-maximum
Parameters peer-address
Address of MSDP peer.
sa-limit
Maximum value that the SA cache allows. Valid values
are 1 to 2048.
Default By default, the maximum number of SA caches is 2048.
Example Limit the number of caches originated to 100 when the router receives SA messages
from the MSDP peer 125.10.7.6.
<3Com> system-view
[3Com] msdp
[3Com-msdp] peer 125.10.7.6 sa-cache-maximum 100
View This command can be used in the following views:
■ MSDP view
Description This configuration is recommended for all MSDP peers in the networks possibly
attacked by DoS.
Related Commands ■ display msdp
■ sa-count
■ display msdp peer-status
■ display msdp brief