Command Reference Guide

3Com Router 5000 Family and Router 6000 Family peer request-sa-enable ● 107
Command Reference
peer request-sa-enable
Purpose Use the peer request-sa-enable command to enable the router to send SA
request message to the specified MSDP peer when receiving a new group join
message.
Use the undo peer request-sa-enable command to remove the
configuration.
Syntax peer peer-address request-sa-enable
undo peer peer-address request-sa-enable
Parameters peer-address
Address of MSDP peer.
Default By default, when receiving a new group join message, the router sends no SA request
messages to MSDP peers but waits to receive the next SA message.
Example Configure to send SA request message to the MSDP peer 125.10.7.6.
<3Com> system-view
[3Com] msdp
[3Com-msdp] peer 125.10.7.6 request-sa-enable
View This command can be used in the following views:
■ MSDP view
Related Command cache-sa-enable