Command Reference Guide

3Com Router 5000 Family and Router 6000 Family peer minimum-ttl ● 103
Command Reference
peer minimum-ttl
Purpose Use the peer minimum-ttl command to configure the minimum TTL
(Time-to-Live) value of the multicast data packets encapsulated in SA messages to be
sent to specified MSDP peer.
Use the undo peer minimum-ttl command to restore the default TTL threshold.
Syntax peer peer-address minimum-ttl ttl
undo peer peer-address minimum-ttl
Parameters peer-address
Address of the MSDP peer to which the TTL limitation
applies.
ttl
TTL threshold. Valid values are 0 to 255.
Default By default, the value of TTL threshold is 0.
Example Configure the TTL threshold value to 10, i.e., only those multicast data packets with a
TTL value greater than or equal to 10 can be forwarded to the MSDP peer
110.10.10.1.
<3Com> system-view
[3Com] msdp
[3Com-msdp] peer 110.10.10.1 minimum-ttl 10
View This command can be used in the following views:
■ MSDP view
Related Command peer