Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display snmp-agent usm-user ● 143
Command Reference
display snmp-agent usm-user
Purpose Use the display snmp-agent usm-user command to view information about
the specified or all SNMP users.
Syntax display snmp-agent usm-user [ engineid engineid | username user-name |
group group-name ] *
Parameters engineid
Displays information about the SNMPv3 users with the
specified engine ID.
engineid-string
Character string of the engine ID.
username
Displays information about the specified SNMPv3 user.
user-name
User name. Valid values are 1 to 32 bytes.
group
Displays information about the users in the specified
SNMP group.
group-name
Group name. Valid values are 1 to 32 bytes.
Example Display information about all current users.
<3Com> display snmp-agent usm-user
User name: authuser
Group name: 1
Engine ID: 8000007DB20000000C025808 active
Storage-type: nonVolatile
UserStatus: active
The following table describes the output fields.
View This command can be used in the following views:
■ Any view
Description SNMP users are users that remotely execute SNMP management operation.
Table 33 Description on the fields of the display snmp-agent usm-user command
Field Description
User name The character string identifies the SNMP user.
Group name Name of the group to which the SNMP user belongs
Engine ID The character string identifies the SNMP device.
Active Indicates the state of the SNMP user.
Storage-type Storage type of SNMP information
UserStatus State of the SNMP user