Command Reference Guide

3Com Router 5000 Family and Router 6000 Family peer enable ● 97
Command Reference
peer enable
Purpose Use the peer enable command to enable the multicast peer or peer group.
Use the undo peer enable command to disable the multicast peer or peer group.
Syntax peer group-name enable
undo peer group-name enable
Parameters group-name
Name of the multicast peer group.
Default By default, the multicast peer (or peer group) is disabled.
Example Enable the multicast peer test.
[3Com-bgp-af-mul] peer test enable
[3Com-bgp] peer test enable
View This command can be used in the following views:
■ IPv4 Multicast Subaddress Family view
Description Only after the peer (peer group) is enabled, can it establish connection with the
multicast peer.