Command Reference Guide

3Com Router 5000 Family and Router 6000 Family peer allow-as-loop ● 93
Command Reference
peer allow-as-loop
Purpose Use the peer allow-as-loop command to allow the AS_PATH attribute in the
received routes to include the local AS number.
Use the undo peer allow-as-loop command to disallow the AS_PATH attribute
in the received routes to include the local AS number.
Syntax peer { group-name | peer-address } allow-as-loop [number]
undo peer { group-name | peer-address } allow-as-loop
Parameters group-name
Peer group name.
peer-address
Peer IP address.
number
Specifies the times that the local AS number allows to
be present in the received route update messages.
If not specified, the default is 3.
Default By default, the local AS number is unacceptable in the received route updates.
Example Specify to contain the local AS number in the AS_PATH attributes received.
[Quidwa-bgp] ipv4-family multicast
[3Com-bgp-af-vpn] peer 1.1.1.1 allow-as-loop 1
View This command can be used in the following views:
■ IPv4 Multicast Subaddress Family view