Command Reference Guide

142 ● display snmp-agent trap-list 3Com Router 5000 Family and Router 6000 Family
Command Reference
display snmp-agent trap-list
Purpose Use the display snmp-agent trap-list command to display whether trap
sending is enabled on each module.
Syntax display snmp-agent trap-list
Parameters None
Example Display whether trap sending is enabled on each module.
[3Com] display snmp-agent trap-list
bgp trap enable
configuration trap enable
flash trap enable
ldp trap enable
lsp trap enable
ospf trap enable
standard trap enable
vrrp trap enable
system trap disable
Enable traps :8; Disable traps 1
The command output shows that trap sending is enabled on all modules other than
the system module.
View This command can be used in the following views:
■ Any view
Related Command snmp-agent trap enable