Command Reference Guide

3Com Router 5000 Family and Router 6000 Family peer ● 91
Command Reference
peer
Purpose Use the peer command to configure an MSDP peer.
Use the undo peer command to remove the MSDP peer configured.
Syntax peer peer-address connect-interface interface-type interface-number
undo peer peer-address
Parameters peer-address
Address of MSDP peer.
connect-interface
interface-type
interface-number
Interface type and number whose primary address is
used by the local router as the source IP address to
establish TCP connection with remote MSDP peers.
Example Configure the router using IP address 125.10.7.6 as an MSDP peer of the local router.
<3Com> system-view
[3Com] msdp
[3Com-msdp] peer 125.10.7.6 connect-interface ethernet 0/1/0
View This command can be used in the following views:
■ MSDP view
Description If the local router is also in BGP peer relation with a MSDP peer, the MSDP peer and
the BGP peer should use the same IP address.
Related Command static-rpf-peer