Command Reference Guide

90 ● originating-rp 3Com Router 5000 Family and Router 6000 Family
Command Reference
originating-rp
Purpose Use the originating-rp command to allow a MSDP to use the IP address of
specified interface as the RP address in the SA message originated.
Use the undo originating-rp command to remove the configuration.
Syntax originating-rp interface-type interface-number
undo originating-rp
Parameters interface-type
Interface type.
interface-number
Interface number.
Default By default, the RP address in the SA message is the RP address configured by PIM.
Example Configure IP address of the interface Ethernet1/0/0 as the RP address in the SA
message originated.
<3Com> system-view
[3Com] msdp
[3Com-msdp] originating-rp ethernet 1/0/0
View This command can be used in the following views:
■ MSDP view
Description Configure logical RP by using this command.