Command Reference Guide

3Com Router 5000 Family and Router 6000 Family network ● 89
Command Reference
network
Purpose Use the network command to configure the network addresses to be sent by the
local BGP.
Use the undo network command to remove the existing configuration.
Syntax network ip-address [ address-mask ] [ route-policy policy-name ]
undo network ip-address [ address-mask ] [ route-policy policy-name ]
Parameters ip-address
Network address that BGP advertises.
address-mask
Mask of the network address.
route-policy policy-name:
outing policy applied to the routes advertised.
Default By default, the local BGP does not advertise any route.
Example Advertise routes to the network segment 10.0.0.0/16.
[3Com-bgp-af-mul] network 10.0.0.1 255.255.0.0
View This command can be used in the following views:
■ IPv4 Multicast Subaddress Family view