Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ipv4-family multicast ● 73
Command Reference
ipv4-family multicast
Purpose Use the ipv4-family multicast command to enter the IPv4 multicast
subaddress family view.
Use the undo ipv4-family multicast command to remove all the
configurations in the IPv4 multicast subaddress family view.
Syntax ipv4-family multicast
undo ipv4-family multicast
Parameters None
Example Enter the IPv4 multicast subaddress family view.
<3Com> system-view
[3Com] bgp 100
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul]
View This command can be used in the following views:
■ BGP view