Command Reference Guide

70 ● ip rpf-longest-match 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip rpf-longest-match
Purpose Use the ip rpf-longest-match command to configure the longest-match rule to
be the multicast RPF route selecting policy.
Use the undo ip rpf-longest-match command to restore the default
configuration.
Syntax ip rpf-longest-match
undo ip rpf-longest-match
Parameters None
Default By default, routes are selected according to the preference-preferred rule.
Example Set the longest-match rule to be the multicast RPF route selecting policy.
[3Com] ip rpf-longest-match
View This command can be used in the following views:
■ System view