Command Reference Guide

68 ● import-route 3Com Router 5000 Family and Router 6000 Family
Command Reference
import-route
Purpose Use the import-route command to import routing information from other
protocols to BGP.
Use the undo import-route command to cancel the importing of routing
information from other protocols.
Syntax import-route protocol [ route-policy policy-name ] [ med metric ]
undo import-route protocol
Parameters protocol:
Source routing protocols that can be imported, which
can be direct, ospf, ospf-ase, ospf-nssa, rip, isis and
static at present.
metric:
Metric value loaded by an imported route.
policy-name:
Routing policy used by an imported route.
Default By default, the source address or source interface of the tunnel is not specified in the
system.
Example Configure to import a static route.
[3Com-bgp-af-mul] import-route static
View This command can be used in the following views:
■ IPv4 Multicast Subaddress Family view