Command Reference Guide

62 ● igmp proxy 3Com Router 5000 Family and Router 6000 Family
Command Reference
igmp proxy
Purpose Use the igmp proxy command to specify an interface of a leaf network router as
the IGMP proxy of another interface.
Use the undo igmp proxy command to remove the configuration.
Syntax igmp proxy interface-type interface-number
undo igmp proxy
Parameters interface-type
Proxy interface type.
interface-number
Proxy interface number.
Default By default, IGMP proxy function is disabled.
Example Configure the IGMP proxy of router Ethernet0/0/0 to Ethernet1/0/0.
[3Com-Ethernet0/0/0] igmp proxy ethernet 1/0/0
View This command can be used in the following views:
■ Interface view
Description You must enable PIM on the interface before you configure the igmp proxy
command. An interface cannot act as the IGMP proxy of two or more other interfaces
at the same time.
If an interface is configured with IGMP proxy for multiple times, the last one overrides
all the previous configurations.
Related Command pim neighbor-policy