Command Reference Guide

58 ● igmp host-join 3Com Router 5000 Family and Router 6000 Family
Command Reference
igmp host-join
Purpose Use the igmp host-join command to enable an interface of a router to join a
multicast group.
Use the undo igmp host-join command to disable the configuration.
Syntax igmp host-join group-address
undo igmp host-join group-address
Parameters group-address
Multicast address of the multicast group that an
interface will join.
Default By default, an interface does not join any multicast group.
Example Configure Ethernet1/0/0 to join the multicast group 255.0.0.1.
[3Com-Ethernet1/0/0] igmp host-join 225.0.0.1
View This command can be used in the following views:
■ Interface view
Description On one router, up to 1024 interfaces can be configured with igmp host-join
command at best.
Related Command igmp group-policy