Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1801180218031804180518061807180818091810
50 ● display pim interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
display pim interface
Purpose Use the display pim interface command to view the PIM interface
information.
Syntax display pim interface [ interface-type interface-number ]
Parameters interface-type
interface-number
Interface type and interface number.
Example Display the PIM information about the interface Ethernet1/0/0.
<3Com> display pim interface ethernet 1/0/0
PIM information of interface Ethernet1/0/0:
IP address of the interface is 10.10.1.20
PIM is enabled on interface
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
Total 1 PIM neighbor on interface
PIM DR(designated router) is 10.10.1.20
View This command can be used in the following views:
■ Any view
Table 2 Description of output information of display pim interface command
Item Description
PIM is enabled on interface PIM SM is enabled on the interface Ethernet1/0/0.
PIM query interval is 30 seconds The sending interval of Hello message is 30 seconds.
PIM DR (designated router) is
10.10.1.20
IP address of DR is 10.10.1.20.