Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1801180218031804180518061807180818091810
48 ● display multicast rpf-info 3Com Router 5000 Family and Router 6000 Family
Command Reference
display multicast rpf-info
Purpose Use the display multicast rpf-info command to view the Reverse Path
Forwarding (RPF) routing information for specified multicast source.
Syntax display multicast rpf-info source-address
Parameters source-address
IP address of the multicast source.
Example Display all the RPF routing information.
<3Com> display multicast rpf-info 192.193.194.192
Multicast source’s RPF route information about 192.193.194.192
RPF interface: InLoopBack0, RPF neighbor: 127.0.0.1
Referenced route/mask: 192.193.194.192/32
Referenced route type: unicast (DIRECT)
RPF-route selecting rule: preference-preferred
View This command can be used in the following views:
■ Any view