Command Reference Guide

44 ● display multicast routing-table static config 3Com Router 5000 Family and Router 6000 Family
Command Reference
display multicast routing-table static config
Purpose Use the display multicast routing-table static config command to
view multicast static routes configured.
Syntax display multicast routing-table static config [ source mask ]
Parameters source
IP address of multicast source (unicast address).
mask
IP address mask of multicast source.
Example Display all the configured multicast static routes.
<3Com> display multicast routing-table static config
Display the multicast static routes that exactly match the address 1.0.0.0/8.
<3Com> display multicast routing-table static config 1.0.0.0 255.0.0.0
View This command can be used in the following views:
■ Any view
Description If no multicast source address is specified, all configured multicast static routes will be
displayed.
Related Command display multicast routing-table static