Command Reference Guide
40 ● display msdp sa-cache 3Com Router 5000 Family and Router 6000 Family
Command Reference
display msdp sa-cache
Purpose Use the display msdp sa-cache command to view (S, G) state learnt from
MSDP peer.
Syntax display msdp sa-cache [ group-address ] [ source-address ] [
autonomous-system-number ]
Parameters group-address
Group address of (S, G) entry.
source-address
Source address of (S, G) entry. With no source address
specified, all the source information of the specified
group will be displayed. If neither group address nor
source address is determined, all SA caches will be
displayed.
autonomous-system-number
Displays (S, G) entries from specified autonomous
system.
Example <3Com> display msdp sa-cache
MSDP Total Source-Active Cache - 5 entries
(Source, Group) Origin RP Pro AS Uptime
Expires
(10.10.1.2, 225.1.1.1) 10.10.10.10 BGP 100 00:00:10
00:05:50
(10.10.1.3, 225.1.1.1) 10.10.10.10 BGP 100 00:00:11
00:05:49
(10.10.1.2, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11
00:05:49
(10.10.2.1, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11
00:05:49
(10.10.1.2, 225.1.2.2) 10.10.10.10 BGP 100 00:00:11
00:05:49
MSDP matched 5 entries
View This command can be used in the following views:
■ Any view
Description Only cache-sa-enable command is configured, can cache state be displayed.