Command Reference Guide

36 ● display igmp interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
display igmp interface
Purpose Use the display igmp interface command to view the IGMP configuration
and running information on an interface.
Syntax display igmp interface [ interface-type interface-number ]
Parameters interface-type
interface-number
Interface type and interface number of the router, used
to specify the interface. If the parameters are not
specified, information about all the interfaces running
IGMP will be displayed.
Example Display the IGMP configuration and running information on an interface.
<3Com> display igmp interface
Ethernet0/0/0 (10.10.1.20):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in seconds): 120
Value of maximum query response time for IGMP(in seconds): 10
Policy to accept IGMP reports: none
Querier for IGMP: 10.10.1.10
Total 2 IGMP groups reported
LoopBack0 (20.20.20.30):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in seconds): 120
Value of maximum query response time for IGMP(in seconds): 10
Policy to accept IGMP reports: none
Querier for IGMP: 20.20.20.30 (this router)
No IGMP group reported
View This command can be used in the following views:
■ Any view
Description The information displayed through display igmp interface will be different
according to the configuration of IGMP proxy on an interface.
If the interface is neither a proxy nor a client, the configuration of IGMP Proxy will not
be displayed.
If the interface is a proxy, all the clients will be displayed.
If the interface is a client, the proxy will be displayed.