Command Reference Guide

136 ● display snmp-agent group 3Com Router 5000 Family and Router 6000 Family
Command Reference
display snmp-agent group
Purpose Use the display snmp-agent group command to view information about the
specified or all user security model (USM) based groups, including group name,
security model, storage type.
Syntax display snmp-agent group [ group-name ]
Parameters group-name
Specifies the group name of the SNMP information to
be displayed. Valid values are 1 to 32 bytes.
Example Display SNMP groups and their security model.
<3Com> display snmp-agent group
Group name: v3r2
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonVolatile
The following table describes the output fields:
View This command can be used in the following views:
■ Any view
Table 29 Description on the fields of the display snmp-agent group command
Field Description
Groupname SNMP group name corresponding to the user
Security model Security model of SNMP
Readview Name of the read-only MIB view corresponding to the group
Writeview Name of the write MIB view corresponding to the group
Notifyview Name of the notify MIB view corresponding to the group
Storage-type Storage type