Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging pim sm ● 21
Command Reference
debugging pim sm
Purpose Use the debugging pim sm command to enable PIM-SM debugging functions.
Use the undo debugging pim sm command to disable the debugging functions.
Syntax debugging pim sm { all | mbr | mrt | msdp | timer | verbose | warning |
{ recv | send } { assert | bootstrap | crpadv | jp | reg | regstop } }
undo debugging pim sm { all | mbr | mrt | msdp | timer | verbose |
warning | { recv | send } { assert | bootstrap | crpadv | jp | reg |
regstop } }
Parameters mbr
Debugging information of PIM-SM multicast boundary
router event.
mrt
Debugging information of PIM-SM multicast routing
table.
msdp
Functions between PIM-SM and MSDP.
timer
Debugging information of PIM-SM timer.
warning
Debugging information of PIM-SM warning message.
recv
Debugging information of PIM-SM receiving packets.
send
Debugging information of PIM-SM sending packets.
assert | bootstrap | crpadv
| jp | reg | regstop
Packet type.
Default By default, PIM-SM debugging functions are disabled.
Example Enable all PIM-SM debugging functions
<3Com> debugging pim sm all
View This command can be used in the following views:
■ User view
Description The command debugging pim sm register-proxy is only suitable for the
distributed router. This command can enable the debugging when an interface board
acts as a proxy of main control board to send register packets.